Showing posts with label craft.. Show all posts
Showing posts with label craft.. Show all posts

Wednesday, September 25, 2013

DIY necklace with feathers ! By @themorasmoothie

necklace, fashion, diy fashion blog


Hi everyone, how are you?
Today I'm posting the DIY's necklace that you have seen here, to create I used it 3 feathers, golden and black pearls and black silk thread.
How did I make?
I made a knot with the thread on the feather, then I put the pearls and I cut the piece of feather.
I made the same thing for all the 3 feathers and then I joined them stringing any pearls, then with the silk thread I created a braid and I applied the closure and the pendant with feathers, what do you think about?
Have a nice day and soon ... kisses and kisses!



Ciao a tutti, come state? 
Oggi vi posto il DIY della collana che avete visto qui, per crearla ho usato 3 piume, delle perle oro e delle perle nere e del filo di seta nero. 
Come ho fatto? 
Ho fatto un nodino con il filo sulla piuma, poi ho infilato le perline ed ho tagliato il pezzo di piuma.
Ho fatto la stessa cosa per tutte e 3 le piume e poi le ho unite infilando delle perline, poi con il filo di seta ho creato una treccia ed ho applicato la chiusura ed il ciondolo con le piume, che ne dite? 
Buona giornata a voi e a prestissimo...baci baci!


Follow on Bloglovin


Sunday, July 7, 2013

Diy Gucci ring


diy ring


Hi there my friends, today's DIY is about a ring "around the finger" that you have already seen here, the inspiration came to me looking at the Gucci's  sandals and so I started to work immediately. 
I used strips of leather.
As tutor to make it I used a piece of plastic made ​​from a bottle, to follow the pics of how to make it (to be honest I often use this tutor to create rings).
Back to this ring I first applied double-sided tape on the tutor and then I applied 3 pieces of leather  with the part of the back facing me, one a little bit bigger, to make it more rigid I glued the pieces of wire then I applied  over others strips.
To finish with a piece of leather along a little more than twice the length of the ring with double-sided tape I stuck the whole thing, then I got out from the tutor and I did pass the piece of leather even down,  trying to remain under the seam.
What do you think about?
A big kiss and soon.


Ciao a tutti, il Diy di oggi è un anello a tutto dito che avete già visto qui, l' ispirazione mi è venuta guardando i sandali di Gucci e così mi sono messa subito al lavoro. 
Ho usato delle strisce di pelle. 
Come tutor per realizzarlo ho usato un pezzo di plastica ricavato da una bottiglia, a seguire le foto di come farlo (se devo essere sincera uso spesso questo tutor per poter creare degli anelli). 
Tornando a questo anello ho prima applicato del nastro biadesivo sul tutor e poi ho applicato 3 pezzi di pelle con la parte del rovescio rivolta verso di me,uno un po' più grande, dopo per renderlo più rigido ho incollato dei pezzi di fil di ferro e poi sopra ho applicato delle altre strisce. 
Per finire con un pezzo di pelle  lungo un po' più del doppio rispetto alla lunghezza dell' anello con il nastro bi-adesivo ho bloccato il tutto, poi l' ho tolto dal tutor ed ho fatto passare il pezzo di pelle anche sotto, cercando di far rimanere sotto la giuntura. 
Che ne dite? 
Un bacione e a presto.



Follow on Bloglovin

Monday, June 10, 2013

New Diy bag inspired by Chanel


Hi guys there, today a new Diy, the bag you saw here.
To make it I was inspired by the Chanel bag you see in the first pic. I used pieces of leather of  scrap and recycled.
Tutorial: I created the strips that I joined with glue and some metal clip, then I rolled on the pieces of  holed leather. Then I sewed all the pieces to make the bag and I applied two rivets to the sides to make it through the chain, I finally applied the closure!
What do you think about?
Kisses kisses


Ciao a tutti, oggi un nuovo Diy, la borsa che avete visto qui. 
Per realizzarla mi sono ispirata alla borsa di Chanel che vedete nella foto in apertura. Ho usato dei pezzi di pelle di scarto e reciclati. 
Tutorial: Ho creato delle striscie che ho unito con colla e qualche graffetta, poi le ho arrotolate sui pezzi di pelle bucati. Dopo ho cucito tutti i pezzi per creare la borsa ed ho applicato due rivetti ai lati per far passare la catena, infine ho applicato la chiusura! 
Che ve ne pare?
Baci baci



Follow on Bloglovin


Monday, June 3, 2013

Diy bracelet with boules ! By @themorasmoothie





Hi there, today on my blog a new Diy, a bracelet made ​​of string and golden boules and as closure a washer.
Step by step: to create it I used 5 thread of rope about 55 cm long, I first entered the washer, then I made the 2 nodes and I started to enter the boules, one per thread, then I made the knot, and so on until the end where I created a loop as closure, easy, isn'it?
Kisses Kisses



Ciao, oggi sul mio blog un nuovo Diy, un bracciale fatto di corda e boules dorate e come chiusura una rondella.
Step by step: per crearlo ho usato 5 fili di corda lunghi circa 55 cm, ho prima inserito la rondella, poi ho fatto i 2 nodi ed ho iniziato ad inserire le boules, una per filo, poi ho fatto il nodo, e così ho proseguito sino alla fine dove ho creato un cappio per la chiusura, semplice, no?
Baci baci




Follow on Bloglovin

Thursday, April 25, 2013

Diy necklace inspired by Tory Burch!

diy




Hello my friends, today's on The Mora Smoothie:  Diy Necklace inspired by Tory Burch that you  seen here.
Step by step: I used a piece of black pipe for irrigation, which I covered with raffia in 2 different colors, simply roll it on the tube, then in the recess of the tube I glued the closure. I then format the pendants with the fabric  just cutting it, then rolled up and lock with glue and then to give the 'effect' I spent it in the glue diluted with water. Then I created with raffia braids that I rolled round silver pearls. I stopped everything to the necklace with hooks alternatings them. I hope you'll like it, since there are not all the steps in pics ... (sometimes I am too busy to make my DIY and by the end I'm wrong with the pics) ... if you need help just asking. kisses Kisses



Ciao a tutti, oggi il Diy della collana ispirata a Tory Burch che avete visto qui
Step by step: ho usato un pezzo di tubo nero per irrigazione, che ho ricoperto con la raffia in 2 colori diversi, semplicemente arrotolandola sul tubo, poi nell' incavo del tubo ho incollato la chiusura. Ho poi formato i ciondoli con il tessuto semplicemente tagliandolo, poi arrotolato bloccandolo con la colla e poi per dare l' effetto l' ho passato nella colla diluita con acqua. Poi ho creato con la raffia delle trecce che ho arrotolato intorno alle perle color argento. Ho fermato il tutto alla collana con dei ganci alternandoli. Spero vi piaccia, non essendoci tutti i passaggi in foto...(alle volte sono troppo presa dal finire e mi sbaglio con le foto)... se avete bisogno chiedete pure. Baci baci




Follow on Bloglovin


Thursday, April 18, 2013

MY new Diy Zebra Necklace... by @themorasmoothie

the mora smoothie





Hi everyone, today I'm posting a new Diy made simply with stapler, and a lanyard stripes can be found on the website of Endlessleather (I recommend these lanyard, they are really beautiful and very easy to work with ... the quality it shows!).
Tutorial: I cut a piece of 65 cm (in the follow  pic n.4 is a technical test, it should just cut to the end of the second circle). I created 2 circles at the beginning and at the end, and I stuck with the stapler, then I twisted the center and I stuck  all with  points of stapler, trying to hide them. Then I cut 2 pieces of 25 cm each one, I have stuck to a circle of those created first, and I created the threads of the necklace to which I applied with glue  tne closure.
New necklace with about 115 cm of cord, closure, and stapler, and the great thing is that the time to make it is about 10 minutes ... what do you want more?! A big kiss and see U next post






Ciao a tutti, oggi vi posto un nuovo Diy fatto semplicemente con pinzatrice, e un cordino zebrato lo trovate sul sito di Endlessleather ( vi consiglio questi cordino, sono veramente belli e molto facili da lavorare...la qualità si vede!). 
Tutorial: ho tagliato un pezzo di 65 cm (nella foto 4 a seguire è una prova tecnica, va proprio tagliato alla fine del secondo cerchio). Ho creato 2 cerchi all'inizio ed alla fine e gli ho bloccati con la pinzatrice, poi ho attorcigliato il centro ed ho bloccato il tutto con dei punti di pinzatrice, cercando di nasconderli. Poi ho tagliato 2 pezzi di 25 cm l'uno gli ho bloccati ognuno ad un cerchio di quelli creati inizialmente ed ho creato i fili della collana a cui ho applicato con la colla la chiusura
Nuova collana con circa 115 cm di cordino, chiusura, e pinzatrice, e la cosa bella è che il tempo necessario per farla è di circa 10 minuti...cosa si può volere di più??! Un bacione ed al prossimo post


Follow on Bloglovin

Thursday, March 21, 2013

Recycling Diy Earrings By @themorasmoothie

diy fashion


Hi there, today I'm posting a new Diy, earrings made ​​with recycled material. To make it I used a disposable aluminum pan in which I have divided into equal parts and then cut. Then I pressed the little squares with the tip of the pliers, to create a hammered ... you can also use a hammer on the whole piece. Then I drilled them and I have engaged with the hooks that I have created with silver wire ... but you can use those already made, you can buy ​​in stores and then I put the hook earrings, what do you think about? To be continued ... a big kiss to all of you ... and thank you to be there!




Ciao a tutti, oggi vi posto un nuovo Diy, degli orecchini creati con materiale di riciclo. Per realizzarli ho usato un tegame in alluminio usa e getta che ho diviso in parti uguali e poi tagliato. Dopo ho schiacciato i piccoli quadratini con la punta delle pinze, per creare un effetto martellato...potete usare anche un martello anche sul pezzo intero. Dopo li ho forati e li ho agganciati con dei ganci che ho creato io con il fil di ferro argento...ma potete usare quelli già fatti in vendita nei negozi e poi ho inserito il gancio da orecchini, che ne dite? Alla prossima puntata...un bacio grande a tutti voi...e grazie di esserci!!!







Follow on Bloglovin

Sunday, February 24, 2013

Diy leopard necklace

diy necklace


Hi there, today I'm posting the Diy leoprad necklace worn  here. It 's  a not perfect reconstruction of the step by step. To make it  I used a piece of leopard fabric where I drew the shape of the necklace, then I cut and I glued the black sequins, then I glued the adhesive studs passing with a hot iron, and finally to give the light touches I put golden glitter . After I glued the black fabric and ribbon as closure. What do you say about? I hope it's easy to understand, a great big kiss and see you soon




Ciao a tutti, oggi vi posto il diy della collana leopardata indossata qui. E' una ricostruzione non proprio perfetta dello step by step. Per realizzarla ho usato un pezzo di tessuto leopardato dove ho disegnato la forma della collana, poi l'ho ritagliato ed ho incollato delle paillettes nere, poi ho incollato le borchie adesive passandole con il ferro caldo, infine per dare dei tocchi di luce ho messo dei glitter dorati. Dopo ho incollato del tessuto nero e il nastro come chiusura. Che ne dite, spero si capisca abbastanza, un bacione grande e a presto






Follow on Bloglovin